|
Korolon™ 700 developed by MiTi® has elasticity and very low friction up to 700°F. MiTi® has developed proprietary adhesion technologies, to provide dramatically improved abrasion
resistance to metals, ensure reliability, and create exceptional friction performance. Korolon™ 700 looks and
feels like PTFE, but has a much lower coefficient of friction, and twice the thermal capability.
PERFORMANCE CHARACTERISTICS
| Properties of Korolon™ 700 |
| Chemical Composition | Polymer based coating with solid lubricants |
| Chemical Resistance | Inert to Alkalis & Solvents |
| Oxidation Behavior | Resistant to 700°F |
| Service Temperature | Up to 700°F |
| Application Method | Spray Gun Process |
| Recommended Substrate | Metal |
| Color | Black-Gray |
| Tribological Behavior | Low Friction and Wear |
| Advantages over Greases and Oils |
| Bonded to Surface |
| Contaminant Free |
| Consistent Performance |
TRIBOLOGICAL PROPERTIES
Extensive friction and wear testing has shown that Korolon™ 700 has excellent wear and
friction performance. High speed testing was conducted on a sophisticated tribometer using a
coated Inconel X750 pad on a hard chrome-plated Inconel 718 alloy disc set-up (contact pressure
was 21KPa). The friction coefficient was in the range of 0.05 when testing with the
Korolon™ 700, this is significantly lower than obtained with any polymer/PTFE Polyamide-
imide coating, a commonly used polymer coating tested under the same application methods and
conditions.
| 
